CO Transmitter

CO Monitor/Controller

¡¡

CO Monitor/Controller

¡¡

(CO Monitor/Controller) CO Monitor/Alarm
Model: G02-CO-B3
       detailed data download

Features

-Real time monitoring carbon monoxide level with range from 0 to 500ppm.
-Semiconductor sensor with 5 years long lifetime
-Three-color (green/yellow/red) LCD backlit
-Temperature and humidity detection and display optional
-Preset the first and the second alarm levels for measured carbon monoxide with a buzzer alarm
-Provide 1xOn/Off relay output to control a ventilator
-Provide four setpoints of CO to control the relay action
-Modbus RS¨C485 communication interface optional, 15 KV antistatic protection, independent address setup
-High quality technics and elegant appearance, best choice for home and office
-230VAC or 24VAC/VDC power selectable; power adaptor available; desktop and wall mounting type available
-Wall mounting type and desktop type selectable
-CE-approval

(CO Monitor/Controller) Carbon Monoxide Monitor

Model: F2000IAQ-CO        detailed data download

¡¡

-Real time detection and controlling ambiance carbon monoxide level
-Detection temperature and optional relative humidity
-Preset the 1st and 2nd alarm point for carbon monoxide measurement
-LCD display CO level, temperature and humidity at the same time
-Provide up to 1 analog signal output and 2 dry contact outputs
-Provide RS485 communication Interface (optional)
-High performance, low price

Features:
-Real time monitoring carbon monoxide level with range from 0 to 1000ppm
-Semiconductor sensor with 5 years long lifetime
-LCD can display CO, temperature and humidity, also ventilation device status etc.
-Full time monitoring CO level, even the slightest leak can be detected
-It can work as a alarm or controller of carbon monoxide, also as a transmitter
-Provide up to 0~10V analog output and 2 relay dry contact outputs
-Two alternatives for the analog output: linearized over full range output or PID control output
-Preset the first and the second alarm levels for measured carbon monoxide with a buzzer alarm
-RS485 communication interface, 15 KV antistatic protection, independent address setup

Applications:
Carbon monoxide is a deleterious gas with colorless and odorless character , which could be absorbed by lung quickly, the speed rate of combination of CO and hemoglobin more than 250 times with oxygen, then stops oxygen circulation around the body; which have big character of heavy toxicity, so CO poisoning have became a big problem around the world.

F2000IAQ-CO is used to monitor room CO level and temperature as well as relative humidity. With one 0~10VDC analog output and two dry-contact of relay outputs, F2000IAQ-CO can be as a programmable logical controller to direct control a ventilation system, and also as a transmitter of CO level to connect with a DDC/PLC.

F2000IAQ-CO can provide RS485 communication interface to connect it with a PC or another control system, so make each room ventilation system be managed and controlled intelligently. It's as a prevent monitor of CO potential leak and a controller of ventilation system in bellows application.

-Human environment, Industrial environment
-Underground parking lot, maintenance garage
-Freezing machine room and other places where air quality is easy to worsen

 ( If you need user manual or E-catalogue for above meters, please ask for at: xiushunjie@gmail.com )