wall entry

TOTAL TELECOM AND NETWORKING CO., LTD.

Cable Entry

( wall entry)

The cable entry, which is used for the waterproof when feeder enters the machine room, is composed of entrance wall / roof feed through plate and cable entry boot. It has good airproof and easy installation features.

Cable Entry( Circular Orifice type)

Part No.

Description

Photo

660501A

6 hole alterable cable entry

660501B

9 hole alterable cable entry

660501C

12 hole alterable cable entry

Cable Entry Boot( Throat Hoop Type)

Part No.

Description

Photo

660502A

cable entry boot for one 7/8" hole

660502B

cable entry boot for one 1 1/4" hole

660502C

cable entry boot for one 1 5/8" hole

660502D

cable entry boot for two 7/8" holes

660502E

cable entry boot for three 7/8" holes

660502F

cable entry boot for four 1/2" holes

Wall Entry( Diameter Adjustable type)

Part No.

Description

Photo

660503

7/8" *12hole + 1/2"*6holes

Installation
1) Obligate one hole on the wall of BTS, About the size of hole, please see attached product specification.
2) Fix the plate on the hole with swell screw.(see attached drawing)
3) Seal the joint of plate and wall with waterproofing silica gel.
Alterable Cable Entry
The customer can chose from different types and usages according to requirements.
Alterable cable entry adopts two sealing technologies: multidiameter and modularization. We can choose different modules to seal the holes of rectangle or square cable entry.
The alterable cable entry and its multidiameter sealing technology bring reliability and agility when feeder runs through wall. Easy installation and modularization design can save time and cost when replacing and maintenance in the future.

Please note: we renew our website once in a few days, please visit it usually. Best view: 1024*768.