PROVA 801/803 Digital Multi-Mete

EMF Tester	Light meter
Solar Power Meter	Sound Level Meter
Anemometer	CO2 Tester
DC/AC current clamp Meter	Insulation Tester
Tachometer	3 Phase Power Analyzer
Thermometer	Battery Capacity Tester
Lan Cable Tester	Power Clamp Meter
Multi-Meter	Calibrator
temperature data logger	PH / ORP / Temperature Meter
Flexible AC Current Clamp	Color Meter
Humidity/Temperature Meter	Particle Counter
Micro-Ohmmeter

PROVA 801/803 Digital Multi-Meter


60,000 count and dual input channels 0.04% DC basic accuracy and 0.2% AC basic accuracy Bandwidth of 10KHz(max) Fast ACV, ACA response Dual channels measurement similar to a dual channels DSO(V+V,V+A) Hz + duty cycle dual display Capacitance measurement Standalone data logging of 10,708 records for both channels(803) RS-232C interface Application Software (Option) 1/7 the cost

The following accuracy is specified for one single channel (channel 1 or channel 2). If dual channels are used at the same time, additional % of accuracy should be added to the listed accuracy. Please refer to the supplemental dual channels specification. The following accuracy is also specified for the ZEROED (relative) value. The accuracy is given as ±% of reading ± number of least significant digits.

Continuity: ( open voltage 3V approx.)

Range	Resolution	Beeper	Overload Protection
999.99 Ω	0.01 Ω	< 40 Ω ( approx )	AC 1000V

Frequency: (TTL) (Overload Protection AC 1000V)

Range ( Auto )	Resolution	Accuracy
1.000Hz - 2MHz	0.0001Hz - 0.0001MHz	±0.005%±4dgts

DC Voltage: (Input Impedance: 10MΩ )(Overload Protection DC 1000V)

Range	Resolution	Accuracy
60.000mV	0.001mV	±0.2%±9dgts
600.00mV	0.01mV	±0.04%±6dgts
6.0000V	0.0001V	±0.04%±6dgts
60.000V	0.001V	±0.04%±6dgts
600.00V	0.01V	±0.04%±6dgts
1000.0V	0.1V	±0.08%±6dgts

DC Current: (10A terminal is protected by a 20A fast blown, high energy fuse, and the terminal of μ A and mA is protected by 1A fast blown, high energy fuse )

Range	Resolution	Accuracy
600.00μA	0.01μA	±0.4%±20dgts
6000.0μA	0.1μA	±0.2%±20dgts
60.000mA	0.001mA	±0.4%±20dgts
600.00mA	0.01mA	±0.2%±20dgts
1.0000A	0.0001A	±0.2%±20dgts
10.000A 1	0.001A	±0.6%±20dgts

Diode Test: (open voltage 3V approx. overload protection AC 1000V)

Range	Resolution	Accuracy	Short Circuit Current
3.0000V	0.0001V	±2%±5dgts	0.8 mA typical

Duty Cycle: (%, TTL, 1Hz – 600KHz) (Overload Protection AC 1000V)

Range	Resolution	Accuracy
0.001% - 9.999%	0.001%	±30d/KHz±30dgts
10.00% - 100.00%	0.01%	±3d/KHz±3dgts

Resistance: ( Ω )

Range	Resolution	Accuracy	Overload Protection
999.99 Ω	0.01 Ω	±0.25%±9dgts	AC 1000V
9.9999K Ω	0.0001K Ω	±0.15%±6dgts	AC 1000V
99.999K Ω	0.001K Ω	±0.15%±6dgts	AC 1000V
999.99K Ω	0.01K Ω	±0.15%±6dgts	AC 1000V
9.9999M Ω	0.0001M Ω	±0.3%±9dgts	AC 1000V
40.000M Ω	0.001M Ω	±1.5%±9dgts	AC 1000V

Capacitance: (auto range, and for film capacitor or better)

Range	Resolution	Accuracy 1
60.00nF	0.01nF	±1.2% ± 8dgts
600.0nF	0.1n F	±2.5% ± 8dgts
6.000 μ F	0.001 μ F	±2.5% ± 8dgts
60.00 μ F	0.01 μ F	±3.0% ± 8dgts
600.0 μ F	0.1 μ F	±5.0% ± 8dgts

AC Voltage: The accuracy of ACV or AC mV is specified for 5%-100% of range from 20Hz-10KHz, average sensing.Input Impedance is 10M Ω , and overloaded protection is AC 1000V for all range. Accuracy is also specified for single channel (channel 1 or channel 2). If dual channels measurements are performed, additional specification of accuracy will be introduced. Please refer to the supplemental dual channels specification. Due to the wide bandwidth, the reading might not be zero when no inputs present. But the residual reading does not affect the listed accuracy. If the AC reading is less than 100 least significant counts, it is set to zero by the un it.

Range (ACV)	Resolution	Accuracy (50/60Hz)	Accuracy (45Hz-1KHz)	Accuracy (20Hz-45Hz)	Accuracy (1KHz-10KHz)
60.000mV	0.001mV	±0.2%±40dgts	±0.6%±40dgts	±1.6%±50dgts	±4% 40dgts
600.00mV	0.001mV	±0.2%±40dgts	±0.6%±40dgts	±1.6%±50dgts	±2%±40dgts
6.0000V	0.01mV	±0.2%±40dgts	±0.6%±40dgts	±1.6%±50dgts	±2%±40dgts
60.000V	0.0001V	±0.2%±40dgts	±0.6±40dgts	±1.6%±50dgts	±2%±40dgts
600.00V (0-400V)	0.001V	±0.2%±40dgts	±1.0%±40dgts	±1.6%±50dgts	±9%±40dgts
600.00V (400-600V)	0.01V	±0.2%±40dgts	±1.0%±40dgts	±1.6%±50dgts	Not Specified
1000.0V (0-400V)	0.1V	±0.2%±40dgts	±4%±60dgts	±1.6%±50dgts	±4%±80dgts
1000.0V (400-1000V)	0.1V	±0.2%±40dgts	(45Hz-400Hz) ±4%±60dgts	±1.6%±50dgts	Not Specified

Supplemental Dual Channels Specification (DC – 400Hz): The following accuracy should be added to all the listed accuracy if dual channels measurements are performed.

	ACV (Ch2)	DCV (Ch2)	ACA (Ch2)	DCA (Ch2)
ACV (Ch1)	±2%±(V1-V2)* 200 PPM (Ch1, Ch2)	±0.9%±(V1-V2)* 20PPM (Ch1, Ch2)	±0.2μA/V (μA, Ch2) ±2μA/V (mA, Ch2) ±0.4mA/V (A, Ch2) ±4mV/A (mV, Ch1) ±9mV/A (V, Ch1)	±0.5% (Ch1, Ch2)
DCV (Ch1)	±0.9%±(V1-V2)*20 PPM (Ch1, Ch2)	±0.5% (Ch1, Ch2)	±0.5% (Ch1, Ch2)	±0.5% (Ch1, Ch2)

AC Current: (The accuracy is specified for a single channel for 5%-100% of range for 45Hz–10KHz,average sensing, 10A terminal is protected by a 20A fast blown, high energy fuse, and the terminal of μ A and mA is protected by 1A fast blown, high energy fuse. If the AC reading is less than 100 least significant digits, it is set to zero by the unit )

Range (ACA)	Resolution	Accuracy (50/60Hz)	Accuracy(45Hz-1KHz)	Accuracy (20Hz-45Hz)	Accuracy (1KHz-10KHz)
600.00μA	0.01mA	±0.6%±40dgts	±0.8%±40dgts	±2%±20dgts	±4%±20dgts
6000.0μA	0.1mA	±0.6%±40dgts	±0.8%±40dgts	±2%±20dgts	±4%±20dgts
60.000mA	0.001mA	±0.6%±40dgts	±0.8%±40dgts	±2%±20dgts	±0.9%±20dgts
600.00mA	0.01mA	±0.6%±40dgts	±0.8%±40dgts	±2%±20dgts	±0.9%±20dgts
1.0000A	0.0001A	±0.6%±40dgts	±0.8%±40dgts	±2%±20dgts	±2.5%20dgts
10.000A 1	0.001A	±0.9%±40dgts	±0.9%±40dgts	±3.9%±20dgts	±2.5%20dgts

Range (ACA)	Accuracy (20Hz-45Hz)	Accuracy (1KHz-10KHz)	Accuracy (10KHz-20KHz)
600.00μA	±1%±20dgts	±2%±20dgts	±1%±20dgts
6000.0μA	±1%±20dgts	±2%±20dgts	±1%±20dgts
60.000mA	±1%±20dgts	±0.5%±20dgts	±1%±20dgts
600.00mA	±1%±20dgts	±0.5%±20dgts	±1%±20dgts
1.0000A	±1%±20dgts	±1.5%±20dgts	Not Specified
10.000A 1	±2%±20dgts	±1.5%±20dgts	Not Specified

General Specification:

Battery Type:	9V
Display:	5 + 5 digits LCD with 30 segments bar graph
Range Selection:	auto and manual
Overload Indication:	OL
Power Consumption:	4 mA (approx)
Operating Temperature:	-10ºC to 50ºC
Operating Humidity:	less than 85% relative
Altitude:	up to 2000M
Storage Temperature:	-20ºC to 60ºC
Storage Humidity:	less than 75% relative
Dimension:	207mm(L) x 101mm (W) x 47mm (H) 8.15" (L) x 4" (W) x 1.85" (H)
Weight:	430g / 15.2oz (battery included)
Accessories:	Users manual x 1 9V battery x 1 801A1:Holster 801A2:RS-232C interface cable + software

( If you need user manual or E-catalogue for above meters, please ask for at: xiushunjie@gmail.com )